A length of light that follows the table
Where a round shade leaves the ends of a long surface dim, this horizontal piece stretches the glow across every seat - a calm, continuous band built for daily meals and long gatherings.
The piece opens with a slim ceiling canopy fixed to the junction box. From it falls a single horizontal frame of gold steel strips, and the acrylic body hangs beneath them with fine vertical ribs running its full span. Light travels through those ribs rather than bursting out, so the surface below stays even.
Stainless steel carries the gold finish and the strength; acrylic does the diffusing. Together they make a profile that is long and thin on the eye yet sturdy enough to stay straight across a 150 cm run without sagging.
Why the length reads well
- ✓Long gold steel frame with textured acrylic
- ✓Vertical ribs soften the output
- ✓Even spread across a 120–150 cm surface
- ✓Warm LED inside, no bulb fittings
- ✓120 × 12 × 100 cm / 150 × 15 × 100 cm
- ✓Telescoping cords set the hang on site
The details behind the glow
Ribbed acrylic column
The ribs carry warm LED along a lined surface, raising transmission while lending depth you can read across the room.
Glare-free optics
Refraction angles steer the beam away from eyes, so meals stay comfortable with no harsh centre hotspot.
Built-in warm LED
A warm LED runs inside the column, giving a steady dinner glow with no bulb replacements for years.
Adjustable cords
The suspension cords extend or retract on site, fitting loft ceilings and standard rooms from one build.
Gilt stainless frame
An oxidisation-resistant gold steel holds its sheen and resists fading through long-term daily use.
Full-length wash
The 120–150 cm piece lays light along the whole surface, leaving the two ends as bright as the middle.
Choosing the right span
A 120 cm piece suits most four-to-six seat surfaces; the 150 cm version covers a longer run. Set the cord hang before the electrician leaves.
Match length to surface
The 120 cm piece fits a four-to-six seat table; the 150 cm version reaches a longer farmhouse or board top. Keep the piece about two-thirds the surface length for a balanced look.
Keep headroom
The slender body hangs well above heads. Over a table keep the lowest edge roughly 75–85 cm above the top so chairs clear it easily.
Set the hang on site
Telescoping cords lock to length after the canopy is fixed; level the piece before tightening so the span reads straight across the room.
Add light control
The even warm wash suits a control unit, moving from bright dinner light to a soft evening mood. Confirm the driver matches your control type.
Specifications
Core values below come from the original product table. Electrical details to be confirmed before a bulk order.
Where the horizontal piece sits
Dining Room
Hang the piece 75–85 cm above the surface so the warm wash covers every seat for family meals and guests.
Kitchen Island
A long piece over the island lights prep and casual breakfasts without a glaring centre over the counter.
Living Room
Float the piece above a seating group for a continuous warm band that keeps the lounge bright and calm.
Restaurant
Run several pieces over two-top surfaces for a consistent hotel-like accent across the dining floor.
Bedroom
A slim piece above the bed adds a quiet band of light without crowding a lower or smaller room.
Entry Hall
Above a console the horizontal glow greets guests and photographs cleanly against the wall.
A workshop that builds horizontal pendants
Two decades of craft
Since 2004 our bench has shaped steel-and-acrylic luminaires for homes and projects worldwide.
Direct from plant
No reseller stands between you and the line, so the same build costs less through us.
Checks at each stage
Cord balance and acrylic seating reviewed before the carton leaves the floor.
Quick prototypes
Span, gold tone and hang confirmed from a photo of a trial unit within days.
Steady sourcing
Steel, acrylic and LED from standing contracts, so runs never stall for stock.
Private-label ready
Carton, label and gold tone built to your brief, from one carton to a container.
Protected packing
Foam-cradled acrylic bodies survive long sea freight without rub marks.
Easy repeats
Keep your build on file for repeat orders and matched batches down the line.
Adjust span, gold tone and hang
We take private-label runs of this length: change the span, swap the gilt tone, extend the cords for tall ceilings, or add a controllable driver. Each variant is reviewed for cord balance, acrylic seating and transit strength before a prototype ships.
Common asks include a longer 180 cm length for double-height rooms, a brushed-brass tone for hospitality, a clear-smooth acrylic for a cleaner look, and printed retail boxes for store display.
Send your brief
Span, gold tone, hang and target quantity.
Check prototype photos
Cord length, acrylic seating and finish shots for approval.
Confirm and manufacture
Batch manufacture with cord and seating checks before packing.
Fitting and caring for the pendant
Fitting guidance
- ✓Secure the ceiling canopy to a standard junction box.
- ✓Set each telescoping cord before locking the body.
- ✓Level the length so it reads straight and even.
- ✓Connect the LED driver to mains, no bulb fitting needed.
Care guidance
- ✓Dust the acrylic body with a soft dry cloth.
- ✓Keep the gilt frame dry, away from steam and splashes.
- ✓Skip abrasive cleaners on the finish and diffuser.
- ✓Check the cord locks after the first week of hanging.
Questions buyers ask most
1. How does it differ from a round chandelier?
A long piece spreads light along the whole surface instead of from one centre point, so the two ends stay as bright as the middle.
2. Which sizes exist?
The length comes in 120 × 12 × 100 cm and 150 × 15 × 100 cm; longer custom spans are open on request.
3. Can the hang change?
Yes. Telescoping cords extend or retract on site, so one build fits many ceiling heights.
4. How does the gold look?
A gilt oxidisation-resistant steel frame with a vertical ribbed acrylic body, warm and architectural.
5. Is it controllable?
Control depends on the LED driver used; pair the piece with a controllable driver and a compatible wall switch.
6. Does the acrylic yellow?
The textured acrylic is treated for stable transmission; keep it dry and out of direct steam to hold its clarity.
7. What guarantee and turnaround apply?
Guarantee is 1–3 years by agreement. Regular manufacture runs 25–30 days, with rush options open to discussion.
8. Can I order a prototype?
Yes. Send your delivery address and we confirm prototype cost and turnaround for the standard gold build.
Hot Tags: modern dining room light, China modern dining room light manufacturers, suppliers, factory, indoor lighting fixtures that are distributed, indoor lighting fixtures that are wholesaled
