Where stacked discs meet a slim chrome spine
The bulb is the centre and the discs are the story - clear acrylic plates that float above and below it, softening the filament into a calm vertical pool of light.
At the heart sits a single exposed E27 filament bulb, the only light source, left visible so the warm coil reads as the fixture's quiet detail. Around it, clear acrylic diffusers stack in three sizes - a wide top plate, a middle ring and a smaller lower bowl - each spaced by a slim polished-chrome rod so the tiers hover rather than touch.
Chrome forms the spine: a short suspension cable, a small ceiling canopy and the rods that pin the discs in plane. Because the diffusers are clear rather than frosted opal, the glow stays honest and the room sees the filament, which is exactly the look a minimal interior asks for.
The piece reads as architecture, not ornament - a floating disc stack that lowers gracefully over a table or a desk. Where a crystal chandelier scatters sparkle, this pendant layers light in levels and stays almost weightless against a plain ceiling. The open design means no trapped heat and a see-through silhouette that never blocks the wall behind it.
A spun-chrome collar gathers the rods at the centre, and optical-grade acrylic gives the discs a glass-like clarity without the weight or the fragility of real glass. Because the tiers stay low-profile and ventilated, the pendant reads as a calm modern object rather than a busy fitting, and a tool-free bulb swap keeps upkeep simple for the homeowner.
What the design delivers
- ✓Three clear acrylic diffusers stacked by size
- ✓Slim polished-chrome rods and canopy
- ✓Single exposed E27 LED filament bulb
- ✓Warm vertical glow, no hotspot or glare
- ✓Universal E27 socket, easy to source worldwide
- ✓Lightweight acrylic and chrome build
The detail behind the floating tiers
Stacked acrylic diffusers
Three clear discs of decreasing size float in a tidy stack, hiding nothing yet softening the bulb into a soft, even column of light with no harsh point.
Slim chrome rods
Polished-chrome rods pin each disc to the next, keeping the tiers spaced and level while the metal stays thin enough to almost disappear from across the room.
Warm filament glow
A single exposed E27 LED filament bulb sits at the centre, its warm coil visible through the clear discs so the pendant feels lit rather than masked.
Chrome canopy and cable
A small chrome ceiling canopy meets a short suspension cable, so the disc stack hangs true from the roof straight down to the lowest bowl without a visual break.
Universal E27 socket
The socket takes any standard E27 lamp - a 2700K filament for homes or a high-CRI LED for retail - so replacements are simple to find in any market.
Acrylic and chrome build
Lightweight clear acrylic keeps the discs easy to handle and ship, while the chrome spine stays rigid, so the pendant sits level through years of use.
Sizing the disc stack for the room
This pendant earns its place through restraint - give it a plain ceiling and let the floating tiers set a modern, unhurried mood.
Choose the diameter
Pick the 300 mm version where the pendant supports a setting - a bedside corner, a home office, a compact entry. Move to 400 mm when the disc stack must lead: over a kitchen island, above a dining table, or as the single modern note in a lobby. The wider plate simply reads larger from across the room.
Keep the clear finish
The diffusers stay clear so the room sees the warm filament rather than an opaque shade. Pair the chrome spine with chrome tapware, steel frames and pale ceilings; repeating the clear-and-chrome language across a project keeps the interior calm and consistent.
Mind the cable drop
Decide the working height before install: around 1.5–1.6 m above a table for intimacy, or higher in open rooms so the tiers read against the wall. The cable sets the drop; the canopy hides the junction and keeps the stack level.
Choose the bulb deliberately
The E27 socket is your specification point: a 2700K filament lamp softens the discs for homes, while a 90+ CRI LED renders timber and chrome accurately in hospitality. Tell us the application and we recommend the lamp and dimming behaviour before you order samples.
Specifications
Core values come from the original product table. Electrical details to be confirmed prior to a bulk order.
Where the floating tiers belong
Dining Table
The disc stack drops over the table, turning dinner into a soft, layered pool of light while the chrome spine echoes a minimal kitchen. Its vertical glow makes a plain timber top feel like a quiet modern bistro.
Bedside Corner
A 300 mm version beside the bed frees the nightstand and gives the room one gentle point of floating light. Its clear discs suit a linen headboard far better than a heavy crystal frame.
Living Room Sofa
Dropped over the sofa, the tiers glow like stacked lanterns and the chrome ties the seating to the floor below. The minimal silhouette calms a busy lounge without shouting for attention.
Hotel Reception
Behind the marble counter, the chrome spine carries the lobby's metal details and marks the desk from across the room. A contemporary arrival reads instantly more considered under this disc stack.
Entry Console
Centered above the console, the disc stack greets arrivals with a soft halo and sets a modern tone for the interior. The floating tiers recall a city apartment rather than a showroom fitting.
Study Desk
The discs throw even working light across the leather chair and shelving without a hint of screen glare. A scholar's nook gains a quiet, weightless warmth that a bare bulb could never lend.
A maker that forms, plates and balances in-house
Laser-cut acrylic rings
The clear discs are cut from acrylic sheet and edge-polished on our own floor, so a new tier profile moves from drawing to sample without leaving the works.
Chrome plating under one roof
Rods, canopy and cable grip are polished and plated in the same building, so the metal tone stays even from the ceiling down to the lowest ring.
Trued disc stack
A holding jig seats every rod during assembly, keeping the acrylic discs parallel and evenly gapped rather than leaning out of line.
Planned drop at dispatch
Tell us the ceiling height and we preset the cable before shipping, so the pendant arrives ready to hang at the exact level you drew.
Lit clarity check
Each clear disc is lit on the bench to confirm it is cloud-free and optically even, since a foggy plate would dull the whole glow.
Label-ready boxes
Cartons, tags and finish sheets take your artwork, whether the run is one parcel or a full container for a chain.
Pocketed disc seats
Every disc rides in a carved foam pocket that grips the rod, while canopies are double-wrapped with a hang guide tucked inside.
Spec card archived
We keep your diameter, finish and bulb choice on a card, so a later reorder matches the sample you signed off.
Reshape the discs, the rods and the drop
Private-label runs are welcome: custom colour codes for your catalogue, an extra disc added to the stack, drop lengths matched to the ceiling, or a 300 and 400 pairing on one wall. Each variant is checked for true disc arc and a level canopy before the first piece is cut.
Frequent requests include scene-control kits for hotel groups, a matching disc set across the rooms and corridors of one property, and reception pieces that pick up a client's own metal through the chrome canopy.
Send the scope
Space type, disc count, finish and volume.
Approve the mock-up
Finish panels, disc samples and packing proofs for sign-off.
Start the run
One pendant built, hung and lit on the bench, then the line continues.
Fitting and caring for the disc pendant
Fitting guidance
- ✓Isolate the circuit at the main board before any wiring starts.
- ✓Fix the chrome ceiling canopy into a joist or blocking, not only the plaster.
- ✓Set the cable to its planned length and check the stack hangs level before the final tighten.
- ✓Fit the E27 bulb, then switch on to confirm the filament lights before you leave the ladder.
Care guidance
- ✓Dust the discs and rods with a soft dry cloth, following the tier rather than rubbing across.
- ✓Wipe the chrome canopy with a barely damp cloth; solvents dull the acrylic and the metal.
- ✓Keep the cable dry and buff the canopy now and then to hold its tone.
- ✓Once a year, check the canopy grip and the seat of each disc on its rod.
Questions buyers ask most
1. Which size should I pick, 300 or 400?
The 300 mm stack suits bedside corners, home offices and compact entries; the 400 mm adds diameter for kitchen islands, dining tables and lobbies. Many projects run the smaller disc set in guestrooms and the wider one in public areas of the same building.
2. How do the two sizes differ?
Both share the same floating-disc look and 170 mm height; 300 mm is the tight stack for standard rooms, while 400 mm widens the tiers for larger tables and longer counters.
3. What kind of bulb does it use?
It takes one standard E27 lamp. A 2700K filament-style lamp softens the discs, while a high-CRI LED suits retail; the socket accepts any equivalent lamp, so replacements are easy to source locally.
4. Can the cable be cut to a set drop?
Yes. Tell us the ceiling height and where the stack should sit; we set the cable before dispatch so the pendant arrives ready to hang at the planned level.
5. Will the acrylic discs arrive intact?
Each disc travels in a carved foam pocket that grips the rod and canopy, so the clear surface arrives intact; loose spare parts ride in every carton besides.
6. What approval marks can you provide?
CE, RoHS, CB, ETL or FCC are arranged to match the country you sell into. Name the market when you enquire and we lock the mark set before sampling.
7. What is the typical lead time?
A standard order leaves in about four to five weeks depending on the finish mix; an express slot can open when the calendar allows.
8. Can I order a single sample first?
Yes. Leave your contact details and we will quote one unit with a delivery date for the standard clear build.
9. Can the pendant be dimmed?
It dims with a trailing-edge LED driver and a compatible E27 lamp; tell us the wall system in your market and we pair the driver so the discs fade smoothly from bright task light to a low dinner glow.
Hot Tags: tiered chandelier, China tiered chandelier manufacturers, suppliers, factory, indoor lighting fixtures that are distributed, indoor lighting fixtures that are wholesaled
