Led Light Decoration For Room

The fitting is round and built as two layers. A pure white outer ring sets a clean edge against the ceiling, while a softer pink inner disc sits slightly behind it, both drawn with smooth, natural lines rather than hard angles. The result reads as a considered object, not simply a lit panel.

A warm-yellow light strip is revealed in the seam between the two layers. Because the source sits in that gap, the glow outlines the circles instead of staring straight down into the room. Light and shadow build up across the stepped surfaces, giving a flat ceiling a visible sense of depth.

White and pink is a deliberately fresh pairing: light enough for a small bedroom, warm enough to feel domestic in the evening. Fine black lines on the pink inner layer add a small graphic detail that only becomes apparent up close.

What defines the design

• ✓Circular double-layer structure
• ✓Pure white outer ring, soft pink inner disc
• ✓Warm-yellow light strip in the seam
• ✓Layered light and shadow, added depth
• ✓Iron body, edges finished without burrs
• ✓Fine black line detail on the pink layer
• ✓Dual-colour source: cool or warm light
• ✓Universal-spec replacement accessories

Two layers, one outline

The white outer ring and the pink inner disc are stacked with a small offset, so the fitting has real depth from below and reads as a stepped circle rather than a flat disc.

Light held in the seam

A warm-yellow strip sits between the layers, tracing the circumference and washing the pink surface gently instead of throwing a hard pool of light onto the floor.

Rich light and shadow

The stepped surfaces catch different amounts of light, building layered shadows that give a plain ceiling a three-dimensional quality once the lamp is on.

Switchable dual-colour source

The 36W and 41W versions both offer a dual-colour source, so cool light suits a busy afternoon and warm light settles the room for the evening without a second fitting.

Edges and small lines

Every edge is finely processed with no burrs, and the pink inner part carries a unique fine black line detail that gives the shade a tailored finish.

Parts you can replace

Accessories follow universal specifications. If a component is ever damaged, a matching part can be bought on the open market rather than ordered as a proprietary spare.

360×80 mm · 36W

A compact bedroom, a nursery or a dressing corner. The smaller circle keeps the white-and-pink pairing a detail rather than letting it dominate a modest ceiling.

460×80 mm · 41W

A main bedroom, a sitting room or a boutique suite. The wider ring gives the layered light and shadow more room to read from across the space.

Cool light for the day

The dual-colour source can be set to a cooler tone when the room is used for reading, homework, dressing or getting ready in the morning.

Warm light for the evening

Switching to the warmer tone lets the yellow seam strip and the pink inner disc do the work, softening the room without needing a dimmer.

Bedrooms & Master Suites

The warm-yellow seam and soft pink inner layer suit a room meant to wind down, while the cool setting still gives enough clarity for dressing in the morning.

Children's Rooms & Nurseries

A fresh white-and-pink palette reads as playful without themed decoration, and the gentle layered glow avoids a hard bright point above a cot or a play mat.

Living Rooms & Reading Corners

The double layer gives a plain ceiling some depth, so the fitting still looks considered from a sofa when the main light is off.

Boutique Hotels & Homestays

One design language repeated across guest rooms, with the 360 mm and 460 mm bodies covering a standard room and a larger suite.

Cafés, Dessert Shops & Salons

Pink and warm yellow sit naturally with soft furnishings and pastel interiors, giving a service area a recognisable ceiling feature without a custom fitting.

Show Flats & Dressing Rooms

A decorative circle photographs well and helps a staged room feel finished, where a plain white panel would disappear into the ceiling.

Forming the iron rings

Both circular layers are cut and shaped so the outline stays true and the offset between them is even all the way round.

Finishing the edges

Every edge is processed until it is smooth to the hand, with no burrs left on the white outer ring or the pink inner disc.

Applying the two tones

Pure white and soft pink are finished separately and reviewed together, so the contrast stays fresh and consistent across a batch.

Setting the seam strip

The warm-yellow strip is seated between the layers and checked for an unbroken line of light with no dark gaps at the joins.

Drawing the fine lines

The small black line detail on the pink inner part is applied evenly, then inspected at close range for breaks or uneven spacing.

Verifying the dual-colour source

Each unit is switched between cool and warm output, and universal-spec accessories are checked for fit before the carton is sealed.

The double-layer circle is the fixed idea; the colour pairing, the tone of the seam strip and the balance between cool and warm output can all be reviewed against a customer's interior scheme. Share a photograph, a colour reference or a written brief and our engineers will confirm what can be held within the same iron tooling.

Typical project requests include a warmer pink for a nursery range, a neutral cream in place of white for a hotel group, a fixed single-colour build for a distributor, and carton artwork under a customer's own label. Both 360×80 mm and 460×80 mm bodies can be supplied in one order.

Because the rings and the strip are assembled in our own workshop, a finish change does not require a new production line. That keeps a tailored run practical at contract quantities, and samples can be sent by express for sign-off before the order is placed.

Mounting and switching

Isolate the circuit, fix the iron base to the ceiling and make the supply connection before the two layers are closed. Set the dual-colour source to the preferred cool or warm position during commissioning, then run the fitting through both settings once power is restored.

The fitting is only 80 mm deep, so it sits close to the surface and suits rooms with a modest ceiling height. Allow a short period to check that the warm-yellow seam reads evenly from the usual viewing angles before handing the room over.

Cleaning and replacement

Dust the white outer ring and the pink inner disc with a soft dry cloth, working along the curve. Avoid solvents and abrasive pads, which can mark the painted finish or lift the fine black line detail.

If a component is damaged, the accessories follow universal specifications, so a matching part can be sourced locally instead of waiting on a proprietary spare. Isolate the circuit before any replacement and handle the layers from the base rather than the seam.